Tiempo de respuesta y variación dimensional del papel ante fluctuaciones de humedad relativa: implicaciones para su conservación preventiva
Palabras clave:
humedad relativa, conservación preventiva, papel, variaciones termohigrométricas, gran formato, anisotropíaResumen
La respuesta del papel a las fluctuaciones de humedad relativa ambiental (HR) constituye un factor determinante para su conservación, exposición y almacenamiento, especialmente en obras de gran formato. Este estudio analiza el comportamiento dimensional de tres tipos de papel sometidos a cambios controlados de HR, registrando las variaciones longitudinales y transversales en intervalos de 5 minutos hasta que se alcanza el equilibrio higroscópico con el ambiente. Los resultados muestran que la mayor parte del cambio dimensional ocurre durante los primeros 10–15 minutos tras la alteración de la HR, estabilizándose antes de los 20 minutos en todos los casos. Se confirmó además un comportamiento marcadamente anisotrópico: las expansiones fueron más lentas y pronunciadas en dirección transversal (CD) que en la dirección de fabricación (MD). El papel envejecido mostró menor respuesta y una estabilización más rápida, lo que sugiere una reducción en su capacidad de absorción y desorción de agua, asociada a su envejecimiento. Estos resultados, permiten comprender los mecanismos y tiempos de respuesta del papel frente a las variaciones de HR ambiental, y aportan criterios útiles para la conservación preventiva, especialmente en el contexto actual de flexibilización de las condiciones ambientales en instituciones culturales.
Descargas
Citas
AENOR (1997). UNE 7522:1997. Temperaturas de ensayo preferentes. Madrid: Asociación Española de Normalización.
AA.VV.(2010). “The plus/minus Dilema: The Way Forward in Environmental Guidelines”, En International Institute for Conservation of Historic and Artistic Works Dialogues for the New Century Discussions on the conservation of cultural heritage in a changing world. Milwaukee: American Institute for Conservation.
ATKINSON, J. K. (2014). “Environmental conditions for the safeguarding of collections: A background to the current debate on the control of relative humidity and temperature”, Studies in Conservation 59(4): 205-212. https://doi.org/10.1179/2047058414Y.0000000141
BÁGUENA CLEMENTE, M. (2024). Evaluación de las técnicas de alisado por tensión: un estudio de las variaciones dimensionales del papel, Trabajo Fin de Máster. Universitat Politècnica de València, Valencia.
BANIK, G. y BRÜCKLE, I. (2018). Paper and water: a guide for conservators. Munich: Siegl
BENVESTITO, C. (2007). “Venice in pieces: Preservation and display of a pieced and folded woodcut”, Paper Conservator: Journal of the Institute of Paper Conservation, 31: 51-56 https://doi.org/10.1080/03094227.2007.9638653
BROCKMAN, M., MELLON, A. (2020). “Larger than Life: The Conservation Treatment of an Oversized Poster”, Unframed. Los Ángeles: Los Ángeles County Museum of Art (LACMA) https://unframed.lacma.org/2020/04/20/larger-life-conservation-treatment-oversized-poster [consulta: 14/10/2025]
BRANDBERG, A., MOTAMEDIAN, H. R., KULACHENKO A., HIRN, U. (2020). “The role of the fiber and the bond in the hygroexpansion and curl of thin freely dried paper sheets”, International Journal of Solids and Structures, 193-194: 302-313. https://doi.org/10.1016/j.ijsolstr.2020.02.033
C.A.D PLOTTERS INK-JET (2018). Opaco ink-jet 80-90 grs. Safety data sheet.
CARSON, F. T. (1944). Effect of humidity on physical properties of paper. Washington: Department of Commerce. United States of America.
CAULFIELD, D. F. (1988). “Dimensional Stability of Paper: Papermaking Methods and Stabilization of Cell Walls”, Wood Science Seminar 1: Stabilization of the Wood Cell Wall, 87-98.
COELHO, G. B. A., ENTRADAS SILVA, H., Y HENRIQUES F. M. A. (2020). “Impact of climate change in cultural heritage: from energy consumption to artefacts’ conservation and building rehabilitation”, Energy and Buildings 224: 1-19. https://doi.org/10.1016/j.enbuild.2020.110250
EDWARDS SMITH, N. (1992). “The Mounting and Framing of a Large Work of Art on Paper; a Case Study – Victoria and Albert Museum”, Conservation Journal, 03: 1-6.
ERHARDT, D., TUMOSA, C., MECKLENBURG, M. (1999). “Material consequences of the ageing of paper” En: ICOM Committee for Conservation 12th Triennial Meeting Lyon: 501-506
ERHARTD, D., MECKLENBURG, M. (1995). “Accelerated vs. Natural Aging: Effect of Aging Conditions on the Aging Process of Cellulose” En: VANDIVER, J. R et al. (eds.) Materials Issues in Art and Archaeology IV MRS Symposium Proceedings. Pittsburg: Materials Research Society ,352: 247-270. https://doi.org/10.1557/PROC-352-247
FACINI, M. S., Y EVANS, D. (2003). “Big Paper, Big Problems: Preservation Issues of Large Format Works on Paper”, The Book and Paper Group Annual 22: 111-117
FILTER, S. (1994). “Historic Intent: Lodovico Ughi’s Topographical Map of Venice; A Large Wall Map as an Historic Document, a Work of Art, and a Material Artifact”, The Book and Paper Group Annual, 13: 1-6
KIELY, H. U. (1927). “The Effect of Moisture on Paper”, Joint Session of the Connecticut Valley Mill Superintendents and Printing House Craftsmen. https://cool.culturalheritage.org/byauth/kiely/moisture.html [Consulta 10/10/2025]
LARSSON, A. (2008). Dimensional Stability of Paper. Influence of fibre-fibre joints and fibre wall oxidation, Tesis Doctoral. Royal Institute of Technology, Stockholm.
LARSSON, P., HOC, M., WÅGBERG, L. (2009). “The influence of grammage, moisture content, fibre furnish and chemical modifications on the hygro- and hydro-expansion of paper” Advances in Pulp and Paper Research, 355-388. https://doi.org/10.15376/frc.2009.1.355.
LINDNER, M. (2018). “Factors affecting the hygroexpansion of paper”, Journal of Materials Science, 53:1-26. https://doi.org/10.1007/s10853-017-1358-1
LUCCHI, E. (2018). “Review of preventive conservation in museum buildings”, Journal of Cultural Heritage, 29: 180-193. https://doi.org/10.1016/j.culher.2017.09.003
MACHAČKO, L. “Problems of the conservation of artworks on large-format paper supports”, Works of Art on Parchment and Paper: Interdisciplinary Approaches. Liubliana: Univerze v Ljubljani, 159-164. https://doi.org/10.4312/9789610602743
MECKLENBURG, M., TUMOSA C. H. (1999). “Temperature and relative humidity effects on the mechanical and chemical stability of collections”, ASHRAE Journal, 64-79.
MORET DE LA ASUNCIÓN, A. (2020). Impacto de los sistemas de alisado en tensión sobre el papel, Trabajo Fin de Máster. Universitat Politècnica de València, Valencia.
MUÑOZ VIÑAS, S. (2006). “Understanding paper flattening (I). Principles and problems of common flattening techniques”, Arché,1: 145-150.
MUÑOZ VIÑAS, S. (2008) “Anisotropía y creep. Recomendaciones para el alisado por presión del papel” 17th International Meeting on Heritage Conservation, 245-247.
MUÑOZ VIÑAS, S., AMORÓS SOLERA, F. (2008). “Alteración del tamaño de las hojas en el alisado por presión” 17th International Meeting on Heritage Conservation, 235-239.
MUÑOZ VIÑAS, S. (2009). “The impact of conservation pressure-flattening on the dimensions of machine-made paper” Restaurator, 30(3): 181-198. https://doi.org/10.1515/rest.012
NISKANEN, K., KUSKOWSKI, S.J. y BRONKHORST, C. (1997). “Dynamic hygroexpansion of paperboards”, Nordic Pulp & Paper Research Journal, 12(2): 102-110.
PAPELES RASEPE (s.f). Papel Gris Perla – Estraza. Ficha técnica: papel plisadores [Ficha técnica] Disponible en: https://rasepe.com/wp-content/uploads/2022/05/R-PAPEL-GRIS-PERLA-ESTRAZA-PAPEL-PLISADORES.pdf [Consulta: 15/10/2025]
PADFIELD, T. (1994). “The role of standards and guidelines. Are they a substitute for understanding a problem or a protection against the consequences of ignorance?” Durability and Change: The Science, Responsibility, and Cost of Sustaining Cultural Heritage. Sussex: John Wiley and sons: 191-199
PARSA SADR, A., MARACHECHI, S., SUKER, A., BOSCO, E. (2024). “Chemo-mechanical ageing of paper: effect of acidity, moisture and micro-structural features”, Cellulose 11: 6923-6944
PAVLOGEORGATOS, G. (2003). “Environmental parameters in museums”, Building and Environment, 38: 1457-1462. https://doi.org/10.1016/S0360-1323(03)00113-6
ROBERTS, J. (1996). The chemistry of paper. Letchworth: Royal Society of Chemistry
SUGARMAN, J. E, Y VITALE, T. J. (1992) .“Observations on the drying of paper: Five drying methods and the drying process”, Journal of the American Institute for Conservation, 31(2): 175-179.
VONK, J., GEERS, M. Y HOEFNAGELS (2020). “Full-field hygro-expansion characterization of single softwood and hardwood pulp fibers”, Nordic Pulp & Paper Research Journal, 61: 61-74 https://doi.org/10.1515/npprj-2020-0071
ZERVOS, S. (2010). “Chapter 5. Natural and accelerated ageing of cellulose and paper: A literature review” En: Cellulose: Structure and Properties, Derivatives and Industrial Uses. Nueva York: Nova Science Publishers.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
- Los autores conservan los derechos de autor y propiedad intelectual, y garantizan a la revista Ge-Conservación y al GEIIC el Copyright© de los derechos de edición y publicación por cualquier medio y soporte. Las obras de dichos autores además se pueden publicar bajo una Creative Commons Attribution License que autoriza ser distribuido gratuitamente, copiado y exhibido por terceros si se muestra en los créditos la autoría y procedencia original en esta revista, y no se puede obtener ningún beneficio comercial por parte de terceros, ni tampoco se pueden realizar obras derivadas.
- Los artículos podrán ser utilizados para fines científicos y formativos, pero nunca con fines comerciales, expresamente sancionado por la Ley.
- La información contenida en los artículos es responsabilidad exclusiva de los autores.
- La revista Ge-Conservación y los autores pueden establecer por separado acuerdos adicionales para la distribución no exclusiva de la versión de la obra publicada en la revista (por ejemplo, situarlo en un repositorio institucional o publicarlo en un libro), con un reconocimiento de su publicación inicial en esta revista.
- Se permite y se anima a los autores a difundir sus trabajos electrónicamente (por ejemplo, en repositorios institucionales o en su propio sitio web) después de su publicación en la revista Ge-Conservación, ya que puede dar lugar a intercambios productivos, así como a una citación más temprana y mayor de los trabajos publicados por el autor.
- Los datos personales suministrados por los autores únicamente serán utilizados para los fines de la revista y no serán proporcionados a terceros.



